is_customized : YES
Feature : Color change
Material : PVC
Model Name : ST-F648-92CMx152CM
Origin : Mainland China
Read before you buy!!!
--- ** Because the production batches of the products are different, the visible light transmittance of products will have a slight deviation between 1-10%. thank you for understanding.**Tinted windows are becoming increasingly popular with drivers everywhere - and whether you want them for the additional privacy they offer, the protection they give from blazing heat and harmful UV rays, or simply the sleek, polished look they give to your car, it's always an option to tint your side windows yourself. Although tinting car windows can be a difficult task for beginners, the following steps will help facilitate the process, and allow you to give your vehicle a fresh new look. Film tinting is a very popular method for tinting car windows after they've been purchased. With this method, the window glass first needs to be specially treated, before a thin polymer film is carefully attached to the glass. This is probably the least expensive form of window tinting, and some installers believe that the film can even limit the possibility of the windows shattering upon collision. However, film tinting is not permanent and it will need to be replaced every five years or so to prevent cracking, peeling, and bubbling .Consider having your film tint applied by a professional installer if you have never applied film tint before. This way, you can avoid the appearance of bubbles or damage to the film.
Specification:
1.Material:PET
2.Size: 1.38M*1.5M
3. Visible Light Transmittance rate:65%
4.UV protection :38%
5. Heat Insulation:92%
Packing Includes:
1 roll car window film
This is for car window stickers. This Chameleon film thickness is 0.01mm(2mil). Common sense that the thicker the thickness, the harder for installation. The thickness of ordinary window stickers is only between 1.3 and 1.5mil. Please use much more soapy water to wet the window glass and film (both sides of film) if you find it difficult to move.
don't forget to heating the film on outside windshield before apply to inside windshield."heating film" is a step to make the film to have shape of curvy glassread theDescription andwatch this video in this linkhttps://www..us/item/1005006019407664.html?gatewayAdapt=glo2usaINSTRUCTIONS:Notice: Measure the size of the car glass, the length and width of each one plus more than 3 cm, so as not to install the film does not conform to size.A clean window is vital a successful factor,so keep window or glass clean.The first step : put the film outside of the window and heating the shape offilm. don't peel off the backing in this step. refer to this videohttps://we.tl/t-Crhk1gtsVqheating time is half an hour.The second step: remove your old film in the car, Clean the glass withSpecialized degumming detergent. Clean the glass at least three times to ensurethat all old glue is removed.The third step: refer to this installation video https://we.tl/t-U3mQISBJeLNOTE:1.Before installing , please check the film carefully,if you find any creases,tears or other defects,please contact us immediately for advice.Don’t remove the backing sheet or attempt to fit your film .We are unable to accept returns or provide refunds if installation has been attempted.2. After installation, don't wash car and don't drive in the rainy day.
