Solid State Relay with LED Indicator Control AC Optical Isolation SSR Relay 3‑32VDC Input 40A 480

Feature: 1. Input and Output: control AC solid state relay, 3‑32VDC input, 40A 480VAC output, and adopts optical isolation between the input and output circuits. 2. Good Performance: This solid state relay adopts transistor output, low conduction voltage drop, fast switching speed, with control and TTL logic interface. 3. With LED Indicator: This solid state relay is equipped with LED indicator to display the working status, clear and intuitive, greatly improving work efficiency. 4. Integrated Epoxy Resin: With epoxy resin integrated packaging, this solid state relay has good corrosion resistance, which is shockproof, and . . Applications: This SSR relay is widely used in industrial automation, weak and strong current isolation control, motor, solenoid valve, electromagnetic vibrator, battery charging and discharging switch, etc. Specification: Item Type: Solid State Relay Model: VSR8 40DA48Z Input: 3-32VDC Output: 40A 480VAC Load Current Range: 0.05 to 40Arms Maximum Current 10mSec: 200% Load Voltage Range: 60-1200VDC On State Voltage Drop: ≤0.-4.6 Off State Voltage: 60V, 80V, 250V, 400V, 600V, 2900V, 1200V Overvoltage : Transient Voltage: 80V, 180V, 470V, 1000V Switching Characteristics: Mos or IGBT, Solid State Non Contact Switching Characteristics Dielectric Strength Input to Output (50/60Hz): 2500Vrms Dielectric Strength Input Output to Base (50/60Hz): 2500Vrms Minimum Insulation Resistance (at 500 VDC): 10°Ω Load Current Safety Factor: Resistive Load: 2.-3 times, Inductive Load: 3-6 times Operating Temperature Range: -30-80℃ Storage Temperature Range: -30-100℃ Humidity: IEC60068-2-78 95% LED Input Status Indicator: Red Package List: 1 x Solid State Relay Note: Note: 1. The heat generated during the of the relay needs to be dissipated through the base plate. It is necessary to that the relay base plate is in tight contact with the heatsink, firmly installed, and the contact needs to be equipped with a thermal pad or coated with thermal silicone grease. 2. The relay terminals should be firmly connected. Loose connections can cause abnormal heating and damage to the product. The recommended installation torsion for M4 terminals is (1.2‑2.0) N·m, and for M5 terminals is (2‑3) N·m. 3. When the ambient temperature during is high, please refer to the temperature curve for derating use. Warning: 1. The side and base plate of the product will generate heat during use, please touch after cooling. 2. Before installing or using this product, that all power is disconnected. 3. Please check all connections before turning on the power.