EO G33 Type Magnifier 3D Engraved Replica Black EXPS STS Mount Magnifire Booster Scope 3.25x (Black)

【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction.

【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary.

【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product.

【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. Set contents: Main body, STS mount, 6mm spacer, 2 types of each fixing screw, hex wrench, lens cleaning cloth, simple manual Size: Total length approx. 104mm Height from rail connection to center of lens approx. 41mm (approximately 47mm when using spacer) Weight approx. 305g (including spacer) Magnification approx. 3x ★Focus can be adjusted using the dial on the eyepiece. The magnifier's STS (Switch-To-Side) mount allows you to easily switch between 3x and 1x aiming by tilting it to the side 90 degrees, allowing you to quickly switch between medium and short range sightings. Contains clear EO three-dimensional engraving and QR code. ★Since it opens and closes firmly, there is no wobbling and you can aim firmly. ★Compared to the previous model, it is smaller and lighter, and the eye relief has been extended to approximately 5.5cm. The reticle can be adjusted directly using the dials on the top of the booster body (up and down adjustment) and on the sides (left and right adjustment). Important: Since this product is a telephoto booster, there is no aiming or dot projection on its own. Please use it in conjunction with various dot sites. If the aim is a single dot, the shape of the dot may be enlarged and appear distorted. The EO type circle dot shape is projected properly. ✧Please note that depending on the height and specifications of the dot sight, the dot may not be centered just by adjusting the dial. Please adjust the angle of the mount using cardboard or vinyl tape. ✧Important There is a 30-day product warranty from the date of purchase. If you have any questions, please feel free to contact us. ✧The magnifier's STS (Switch-To-Side) mount allows you to easily switch sighting from 3x to 1x by tilting it to the side 90 degrees, allowing you to quickly switch between medium to short range sighting. ✧Magnification is approximately 3x; focus can be adjusted using the dial on the eyepiece. ✧Equipped with clearly embossed EO 3D engraving and QR code. ✧Since it opens and closes firmly, there is no wobbling and you can aim firmly. ✧Compared to the previous model, it is smaller and lighter, and the eye relief has been extended to approximately 5.5cm. ✧Reticle adjustment can be done directly with the dials on the top of the booster body (up and down adjustment) and on the sides (left and right adjustment). ✧This product is a telephoto booster, so there is no aiming or dot projection on its own. Please use it in conjunction with various dot sites. ✧If the aim is a single dot, the dot shape may appear distorted. The EO type circle dot shape is projected properly. ✧Please note that depending on the height and specifications of the dot sight, the dot may not be centered just by adjusting the dial. Please adjust the angle of the mount using cardboard or vinyl tape. [Notes regarding purchase] ※※Please read carefully※※

●We carry out basic inspections and verify lighting operation before shipping. However, as this is an overseas product, there may be inspections during customs clearance, so there may be signs of opening, use, slight scratches, peeling paint, rust, etc. If you are looking for quality similar to domestic products, please refrain from purchasing. Thank you for your understanding and understanding before purchasing. ●The package (hard case) may have some damage or chips. There is no problem with the internal products. Thank you for your understanding in advance. ●Although it can be adjusted vertically and horizontally, there is a limit to the range of movement. If it is difficult to aim when mounted on an air gun, please try adjusting the angle of the base, etc. ●Color may differ from the actual product depending on monitor environment and settings. ●Even if the model is compatible, adjustment may be necessary due to individual differences. ●The 20mm rail may be difficult depending on the model to be installed. Installation is possible by filing the inside of the mount with a file. ★Set contents★ G33 body STS mount 6mm spacer 2 types of fixing screws each hex wrench lens cleaning cloth Simple instructions Hard case (label may change)