----------------------------------------------------------------------
【Voltage Compatibility】
When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction.
【Plug Type】
Our products use Japanese plug types (A or B type).
Please use a conversion adapter if necessary.
【Important Note on Transformers and Adapters】
A transformer adjusts voltage to match your device’s requirements.
A conversion adapter only changes the plug shape and does not adjust voltage.
Using only a conversion adapter without a transformer may result in damage to the product.
【Liability】
We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer.
----------------------------------------------------------------------
Middle class fastest drilling (domestic/November 2020 research by our company). High efficiency with high speed rotation 2,200min-1 + constant rotation control. Masonry drilling speed increased by approximately 35%* (compared to Makita 18V machine). *When using carbide drill φ8mm and brick drilling depth 30mm *Photo shows masonry drilling φ13mm
Woodworking drilling speed increased by approximately 30%* (compared to Makita 18V machine). *When the woodworking hole is φ27mm and the lauan thickness is 30mm *The photo shows the woodworking hole φ38mm. Equipped with highly durable all-metal gear + high-power brushless motor. Maximum torque 65N・m. Constant rotation control. Stable drilling is possible without being affected by the remaining battery capacity or load.
Waterproof protection grade IPX6*. Compatible with this machine as well as batteries. *Although it is designed to be less susceptible to dust and water, it does not guarantee that it will not malfunction. If a battery is installed, the protection level of the main unit will apply. DC 36V (40Vmax), sliding Li-ion battery specifications. Battery and charger sold separately
Maximum drilling capacity (mm): Concrete block 13mm/Ironwork 13mm/Woodwork 38mm. Screw tightening ability: wood screw φ10 x 90mm/machine screw M6. Maximum torque (N・m) 65. Chuck capacity (mm) 1.5mm to 13mm. Rotation speed (min-1) [revolutions/min] High speed 0 to 2,200 Low speed 0 to 600. Number of blows (min-1) [times/min] High speed 0 to 33,000 Low speed 0 to 9,000
Amount of work per charge (estimate): Carbide drill φ8mm brick (depth 30mm) approximately 360 pieces (high speed). Amount of work per charge (estimate): Approximately 960 woodworking awls φ15mm lauan (30mm thick) (high speed). Body length (mm) length 174mm x width 86mm x height 265mm. Mass: 1.9kg *Supplementary information on mass (including battery)
