【Voltage Compatibility】
When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction.
【Plug Type】
Our products use Japanese plug types (A or B type).
Please use a conversion adapter if necessary.
【Important Note on Transformers and Adapters】
A transformer adjusts voltage to match your device’s requirements.
A conversion adapter only changes the plug shape and does not adjust voltage.
Using only a conversion adapter without a transformer may result in damage to the product.
【Liability】
We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer.
- Supports i-TTL auto flash and professional functions as wireless Godox flash trigger/wireless shutter release trigger/wireless Nikon speedlight trigger/flash trigger with 2.5mm sync cord jack.
- Added 01 to 99 wireless ID settings for wireless control and triggering with 16 groups and 32 channels. Effectively avoid signal interference only when the channel and wireless ID of master and slave units are set to the same.
- Fully compatible with TTL auto flash, 1/8000s high-speed sync, multi-flash, manual flash, and flash exposure compensation. TCM conversion function, magnification function, one-shot & multi-shot settings, group modeling ramp control, group zoom, all group adjustments, one output value adjustment at the same time, etc.
- Extra large LCD panel, 5 group buttons and 4 function buttons for easy operation.
- XProN is extremely portable, weighing only 80g.
This flash trigger can be used with the following Nikon series camera models:
D5 D4 D60 D70S D90 D100 D200
0300S D300 D500 D610 D7C0 D750 D800
D810, D3100, D3200, D3300, D5000, D5100, D5200.
D5300 D7000 D7100
specification:
Model: XPro-N
Compatible cameras: Nikon series cameras (i-TTL auto flash) Compatible with cameras that have a PC sync socket.
Power supply: 2 AA batteries.
TTL auto flash: i-TTL
Manual flash: Yes.
Strobe flash: Yes.
High-speed sync: Yes.
Second curtain synchronization: Yes.
Flash exposure compensation: Yes 1/3 stop in 1/3 stop increments.
Flash exposure lock: Yes.
Focus assist: Yes.
Modeling lamp: Control modeling lamp with flash trigger.
Beeper: Control the beeper with a flash trigger.
Wireless setup: The receiver end can control camera shooting through the 2.5 mm sync cord jack.
Zoom settings: Adjust the zoom value on the transmitter.
TCM function: Converts TTL shooting values to M node output values.
Firmware Upgrade: Upgrade via Type-C USB port.
Memory function: Settings will be saved for 2 seconds from the last operation and will be recovered after reboot.
Transmission range (approx.): 0~100m.
Built-in wireless: 24G
Modulation mode: MSK.
Channel:32.
Wireless ID:01-99.
Group: 16.
Display: Large LCD panel, backlight on/off.
Dimensions/Weight: 90x58x50mm/80g.
Package contents
1 x Godox Xpro-N Trigger
Product manual x 1
1 gift
