Coolbe: Produktet kan forårsake en allergisk reaksjon. Les instruksjonene og informasjonen på pakken før bruk. For å få mer informasjon, kan du kontakte selgeren eller produsenten direkte.
-----
Clay gel that can be shaped like clay! Depending on how you make it, you can create unlimited designs such as parts and stone-like designs! Ring nail designs are also recommended.
If you want to enjoy the shine of mirror powder, please apply the top gel after it has hardened. If you prefer a rough texture, apply it as is and coat it with top gel. Please use it as the second layer after applying the base gel.
Size/Capacity Contents: 13g UV/LED compatible UV light 36W: Approx. 60 seconds ~ LED light: Approx. 30 seconds ~
・After applying the base gel, please use it for the second layer onwards. ・Please note that due to the characteristics of the product and the manufacturing process, the container may contain a small amount of dust. ・When forming, do not touch it directly with your hands; use a finger cot, gloves, silicone brush, spatula, or wood stick.
・As a small amount of uncured gel remains, please coat it with top gel. ・Although this is a gel for art with a three-dimensional effect, depending on the thickness of the art, irradiation may be required for longer than the recommended curing time. ・Please note that excessive thickness may cause curing failure. ・It is possible to mix it with glitter and color gel, but please be aware that if you add too much, the viscosity may change, making it difficult to operate or causing poor curing. ・The viscosity may change depending on the temperature of the storage location and operation with gloves. If it is soft, place the container on an ice pack, or if it is too hard, adjust it by boiling it in hot water, etc. ・Due to compatibility with some lights, it may not harden. ・Estimated curing time will vary depending on the light used. ・The standard for hardening is that it does not lose its shape and has elasticity that bounces back even when pressed with a wood stick.
*Please note that extremely thick coating may cause curing heat and poor curing.
Clay gel that can be shaped like clay! Depending on how you make it, you can create unlimited designs such as parts and stone-like designs! Ring nail designs are also recommended. If you want to enjoy the shine of mirror powder, please apply the top gel after it has hardened. If you prefer a rough texture, apply it as is and coat it with top gel. Please use it as the second layer after applying the base gel. Size/Capacity Contents: 13g Compatible with UV/LED UV light 36W: Approximately 60 seconds ~ LED light: Approximately 30 seconds ~ After applying the base gel, please use it for the second layer or later. ・Please note that due to the characteristics of the product and the manufacturing process, the container may contain a small amount of dust. ・When forming, do not touch it directly with your hands; use a finger cot, gloves, silicone brush, spatula, or wood stick. ・Please coat with top gel as a small amount of uncured gel remains. ・Although this is a gel for art with a three-dimensional effect, depending on the thickness of the art, irradiation may be required for longer than the recommended curing time. ・Please note that extreme thickness may cause curing failure. ·lame,
It is possible to mix it with color gel, but please be aware that if you add too much, the viscosity may change, making it difficult to operate or causing poor curing. ・The viscosity may change depending on the temperature of the storage location and operation with gloves. If it is soft, place the container on an ice pack, or if it is too hard, adjust it by boiling it in hot water, etc. ・Due to compatibility with some lights, it may not harden. ・Estimated curing time will vary depending on the light used. ・The standard for hardening is that it does not lose its shape and has elasticity that bounces back even when pressed with a wood stick. *Please note that extremely thick coating may cause curing heat and poor curing.
