TAGATORON Set of Carbon Fiber for MS Chassis Cover 5-Piece [Bridge/Gear Holder/Gear Reinforcement/Motor Holder/Battery Holder]

Welcome to MJ Select. We are Japanese seller. We ship authentic items from Japan. Please enjoy shopping with peace of mind! -------------------------------------------- 【About Included Manuals】 If a manual is included, it will primarily be in Japanese. We recommend using image translation apps if needed. 【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction. 【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary. 【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product. 【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. -------------------------------------------- ✅ [Bridge] Effective in strengthening the chassis rigidity. Installation requires modification to the bottom of the chassis. If you are considering modifying the battery, please purchase the separately sold jig "MS Holder TrimAssist." For chassis that have already been modified for battery removal, adjust the bridge height using washers etc. to match the tire diameter and desired battery height. ✅ [Gear clamp] Reduces play in the counter gear while driving to stabilize torque ✅ [Carbon Fiber for Strengthening the Gear Cover] Increases the rigidity of the chassis against torsion. Attaches to the factory gear cover by modifying it. ✅ [Motor Hold] Prevents the motor's A part from loosening due to impacts while driving, reducing torque loss. ✅ [Battery holder] Lighter than the original part ⚠️When the "bridging carbon" comes into contact with the battery terminal, electricity will flow. Protect the contact area with an insulating material such as masking tape. This product is not manufactured by Tamiya Co., Ltd. It is a compatible product designed for easy prototyping and test driving. It cannot be used in official Mini 4WD competitions or races based on official competition rules. ✅For other competitions and races, please check the regulations and rules of each competition. Product introduction ● [Bridge] This is effective in strengthening the chassis rigidity. Installation requires processing of the bottom of the chassis. If you are considering processing to remove the battery, please purchase the separately sold jig "MS Holder TrimAssist." If your chassis already has a battery removal process, adjust the bridge height using washers etc. to suit the tire diameter and desired battery height. ● [Gear clamp] Stabilizes torque by suppressing play in the counter gear while driving. [Carbon reinforcement for gear cover] Increases rigidity against chassis torsion. Attaches to the original gear cover by modifying it. ● [Motor Hold] Prevents the motor's A part from loosening due to impacts while driving, reducing torque loss. ● [Battery holder] Lighter than the original part *When the "bridging carbon" comes into contact with the battery terminal, electricity will flow. Protect the contact area with an insulating material such as masking tape. This product is not manufactured by Tamiya Co., Ltd. It is a compatible product designed for easy prototyping and test driving. It cannot be used in official Mini 4WD competitions or races based on official competition rules. ●For other competitions and races, please check the regulations and rules of each competition.